← BACK TO ALL POSTS

KE2 Temp + Defrost Controller Is Innovation In Refrigeration

The KE2 Temp + Defrost Controller represents a major advance in Commercial Refrigeration temperature & operation control. Never before has temperature control, automatic defrost & anti short cycling been combined into one digital controller.

 

KE2 Temp + Defrost Controller For Medium & Low Temperature Reach In & Walk In CoolersWe are excited about the introduction of the KE2 Temp + Defrost Controller to the Commercial Refrigeration market recently. This product offers many new features for the control of medium & low temperature refrigeration systems that had previously required separate components for individual functions.

In the past temperature control, defrost & anti short cycling could be achieved only by using one component for each function. A thermostat was needed for temperature control, a separate defrost clock for defrost & a relay for anti short cycling of compressor. Now the KE2 Temp + Defrost Controller can handle all three tasks on medium temperature Refrigeration Equipment (low temperature applications would still require a separate defrost circuit for evaporator fan & coil heater control). The old style temperature, defrost & anti short cycle controls were usually mechanical. All of these features (temperature control, defrost & anti short cycling) are digital & included within the new Ke2 control.

We know from in the field experience that digital controls offer far better precision & accuracy than comparable mechanical refrigeration controls. KE2 also offers a visual alert for high temperature, low temperature & sensor. The control also indicates when system is in defrost mode & also when system is recovering temperature from a defrost mode. This feature cuts down on false alarms & unnecessary service calls. Ke2 is dual voltage & can operate on either 120 or 208 – 240 volt power supply. We believe that this new product offers great features in one digital control. We will be using the KE2 Temp + Defrost on most refrigeration repair & installation jobs in the future due to it’s features & dependability.

Features of the KE2 Temp & Defrost Controller:

  • Thermostat
  • Off time defrost on schedule or custom defrost
  • Compressor protection – Maximum starts per hour
  • Manual defrost
  • 1st defrost 2 hours after start up
  • Visual alarmingHigh temperature / Low Temperature / Sensor
  • Space temperature sensor is supplied with 10 foot lead

Hardware:

  • Relay for solenoid / compressor
  • 3 digit 7 – segment display
  • 4- button user interface
  • Modbus terminals (KE2 Temp includes RS-485 Modbus Communication)

Please leave a comment or ask about this great new product. Also feel free to contact us with any questions about commercial refrigeration.


← BACK TO ALL POSTS